Ubuntu PXE Install
Contents
Howto
Installing Ubuntu via PXE network boot is the way to go if you have no cd-r at hand or if you have no cdrom drive at all.
After reading Installation of Woody with PXE it wasn't hard to setup a PXE boot environment.
Install services
You need the following packages:
- tftpd-hpa
- dhcp3-server
- netkit-inetd
sudo apt-get install tftpd-hpa dhcp3-server netkit-inetd
Note: On Gutsy (7.10) netkit-inetd is a "virtual package." Either inetutils-inetd or openbsd-inetd must be chosen. On one system, openbsd-inetd is already installed - the default now?
Prepare your tftp server
Start your tftpd server via inetd after adding the following line in /etc/inetd.conf:
tftp dgram udp wait root /usr/sbin/in.tftpd /usr/sbin/in.tftpd -s /var/lib/tftpboot
sudo update-inetd --enable BOOT
Don't forget to create the tftp directory /var/lib/tftpboot (if it hasn't already been created)
On Ubuntu 6.06 Server and Feisty Fawn 7.04 (or if /etc/inetd.conf doesn't exist) you might edit /etc/default/tftpd-hpa:
RUN_DAEMON="yes" OPTIONS="-l -s /var/lib/tftpboot"
Prepare your dhcp-server
On what interfaces should the DHCP server (dhcpd) serve DHCP requests? Answer this question by editing the line in /etc/default/dhcp3-server file. Separate multiple interfaces with spaces, e.g. "eth0 eth1". INTERFACES="eth1 eth2"
If you have a working dhcp server add the following lines to your group in /etc/dhcpd.conf file (or, from Feisty upward, the /etc/dhcp3/dhcpd.conf file), substituting IP and MAC address as needed:
host pxeinstall {
# ie. "hardware ethernet 00:0A:E4:2E:A6:42;"
hardware ethernet [MAC address of PXE client networkcard, without brackets];
# this is the unused IP address we will assign temporarly to the PXE client
fixed-address 10.0.0.16;
# Not needed if the tftp server is on the same host as the DHCP server. ie. "next-server 10.0.0.2;".
next-server [ip-address of the server serving tftp];
filename "pxelinux.0";
}
The following simpler file may also work in a trivial environment:
subnet 0.0.0.0 netmask 0.0.0.0 {
range 192.168.0.1 192.168.0.2;
filename "pxelinux.0";
}
Note that you need to assign the client an IP address in the same subnet as the address of the server running tftpd. For example, if your server's address is 192.168.2.13, you should assign your client an IP address that begins with 192.168.2, NOT 192.168.0 .
The "next-server" stanza tells the PXE boot client where to look for the boot image and associated data. It is required in newer editions of tftpd-hpa, if not on the same machine as the DHCP server (I spent a couple of hours trying to figure out why the destination address of the tftp UDP datagrams was 0.0.0.0).
Then start your dhcp server:
/etc/init.d/dhcp3-server start
And verify it runs (if not, you've a problem in the dhcpd config file):
ps ax | grep dhcpd
(the one config sample below worked for me, while the one above did not)
Update (August 20, 2006): for an installation from an Ubuntu server to a Toshiba Portege 3480CT it was MANDATORY to indicate in the DHCP server configuration file the MAC address of the Toshiba laptop ("hardware ethernet xx:yy:zz:uu:vv:tt;"). As soon as the DHCP server was restarted the PXE boot process started. So in my case the first lines worked.
Prepare ubuntu netboot
Get the files
All the files you need are on the install media, or you can get them here: hoary 5.04 warty 5.10 breezy 5.10 dapper 6.06 edgy 6.10 feisty 7.04 gutsy 7.10 hardy 8.10
Put the netboot files into the /var/lib/tftpboot directory.
lftp -c "open http://archive.ubuntu.com/ubuntu/dists/dapper/main/installer-i386/current/images/; mirror netboot/" cp -a netboot/* /var/lib/tftpboot # then untar the pxeboot.tar.gz # (this is not needed anymore, at least on Feisty) cd /var/lib/tftpboot/ tar xfz pxeboot.tar.gz
If Ubuntu is in your cdrom drive:
mount /media/cdrom cp -a /media/cdrom/install/netboot/* /var/lib/tftpboot/
pxe bootloader config
Edit or patch pxelinux.cfg/default . Note : this modification is NOT needed anymore (at least from Feisty).
--- default.org 2004-10-31 15:32:32.000000000 +0100 +++ default 2004-10-31 00:14:52.000000000 +0200 @@ -13,17 +13,11 @@ F0 debian-installer/boot-screens/f10.txt label linux - kernel debian-installer/linux - append vga=normal initrd=debian-installer/initrd.gz ramdisk_size=11057 root=/dev/rd/0 devfs=mount,dall rw -- + kernel vmlinuz + append vga=normal initrd=initrd.gz ramdisk_size=11057 root=/dev/rd/0 devfs=mount,dall rw -- label expert - kernel debian-installer/linux - append DEBCONF_PRIORITY=low vga=normal initrd=debian-installer/initrd.gz ramdisk_size=11057 root=/dev/rd/0 devfs=mount,dall rw -- -label custom - kernel debian-installer/linux - append ubuntu/install-type=custom vga=normal initrd=debian-installer/initrd.gz ramdisk_size=11057 root=/dev/rd/0 devfs=mount,dall rw -- -label custom-expert - kernel debian-installer/linux - append ubuntu/install-type=custom DEBCONF_PRIORITY=low vga=normal initrd=debian-installer/initrd.gz ramdisk_size=11057 root=/dev/rd/0 devfs=mount,dall rw -- + kernel vmlinuz + append DEBCONF_PRIORITY=low vga=normal initrd=initrd.gz ramdisk_size=11057 root=/dev/rd/0 devfs=mount,dall rw -- prompt 1 timeout 0
Directory layout
Should look like this, more or less (depending on the Ubuntu or Debian installer version used):
/var/lib/tftpboot/ /var/lib/tftpboot/pxelinux.0 /var/lib/tftpboot/initrd.gz /var/lib/tftpboot/mini.iso /var/lib/tftpboot/debian-installer /var/lib/tftpboot/debian-installer/linux /var/lib/tftpboot/debian-installer/initrd.gz /var/lib/tftpboot/debian-installer/boot-screens /var/lib/tftpboot/debian-installer/boot-screens/splash.rle /var/lib/tftpboot/debian-installer/boot-screens/f1.txt /var/lib/tftpboot/debian-installer/boot-screens/f2.txt /var/lib/tftpboot/debian-installer/boot-screens/f3.txt /var/lib/tftpboot/debian-installer/boot-screens/f4.txt /var/lib/tftpboot/debian-installer/boot-screens/f5.txt /var/lib/tftpboot/debian-installer/boot-screens/f6.txt /var/lib/tftpboot/debian-installer/boot-screens/f7.txt /var/lib/tftpboot/debian-installer/boot-screens/f8.txt /var/lib/tftpboot/debian-installer/boot-screens/f9.txt /var/lib/tftpboot/debian-installer/boot-screens/syslinux.txt /var/lib/tftpboot/debian-installer/boot-screens/f10.txt /var/lib/tftpboot/initrd.list /var/lib/tftpboot/vmlinuz /var/lib/tftpboot/pxelinux.cfg /var/lib/tftpboot/pxelinux.cfg/default /var/lib/tftpboot/pxelinux.cfg/000AE42EA642
In more detail we need to provide:
- bootloader which is mentioned in the dhcpd.conf file (pxelinux.0)
- a configuration file for the bootloader (default or mac specific)
- a kernel with an initrd file (vmlinuz,initrd.gz)
- an image of the base system (mini.iso)
Start the PXE client
Just boot up the computer that will use DHCP and then PXE to get the images, if something isn't working you can use a sniffer on your install server to check, and look at log files for daemons misconfigurations.
tethereal -R bootp #tethereal -VR bootp tethereal port tftp tcpdump -n tail /var/log/daemon.log
Setup a mirror
With the previous setup, Ubuntu will download install packages straight over the internet. If you prefer to run your network installs over a private network and use your own Ubuntu mirror you can do the following:
- Download apt-mirror and write an /etc/apt/mirror.list configuration file eg.:
set base_path /usr/local/ubuntu/mirror deb http://gb.archive.ubuntu.com/ubuntu/ dapper main restricted deb http://gb.archive.ubuntu.com/ubuntu/ dapper main/debian-installer deb http://gb.archive.ubuntu.com/ubuntu/ dapper main restricted/debian-installer
- Create a 'mirror', 'var' and 'skel' directory under your chosen base path
- Run apt-mirror against the configuration file which you've created. This will replicate the ubuntu mirror to your chosen base path (you will need to create the soft links to the dists and pool directories yourself) eg.:
~$ ls -al /usr/local/ubuntu/mirror total 24 drwxr-xr-x 5 root root 4096 May 18 12:46 . drwxrwxrwx 11 root root 4096 May 18 12:27 .. lrwxrwxrwx 1 root root 34 May 18 12:46 dists -> gb.archive.ubuntu.com/ubuntu/dists drwxr-xr-x 3 root root 4096 May 18 12:46 gb.archive.ubuntu.com lrwxrwxrwx 1 root root 33 May 18 12:46 pool -> gb.archive.ubuntu.com/ubuntu/pool drwxr-xr-x 3 root root 4096 May 18 10:53 skel drwxr-xr-x 2 root root 8192 May 18 13:27 var
- Serve the /usr/local/ubuntu directory out with apache
- When you boot the ubuntu network installer, point it at the ip address and the 'mirror' directory
