Efika

The EFIKA is an embedded PowerPC board with a 400MHz 32-bit freescale MPC5200 (603e/e300), 128MB RAM, 100MBit/s NIC, 2xUSB 1.1, Soundchip, 2.5" harddisk connector, PCI and AGP (with riser-card) and serial out.

Pylon received a board for development work on it. I will leave it in the C4, so that we can attach additional hardware on it.

Ideas for development tasks

1. mpd-server as in-replacement for the already existing one
2. connection to the Fnordlicht
3. using jack for disco-lights

Booting

Harddisk

Currently I don't have any harddisk available, so this could not be tested. But it would be nice to create a complete stand-alone machine out of it.

USB

It's also possible to boot via USB. But it's only USB 1.1, so very slow.

NFS

I will use Gentoo/Linux on that machine. Yes, it might be slow, but it can be changed to your needs. Also it's possible to build on another PowerPC or with cross-dev.

Setup

• Server: 10.10.1.1
• Client: 10.10.1.2

Preparations

1. Download a stage3-tar-ball and unpack it to e.g. /nfsroot.
2. Change /nfsroot//etc/fstab, so that the root-filesystem will be mounted via NFS: 10.10.1.1:/nfsroot / nfs noatime 0 1
3. Change /nfsroot/etc/securetty and add a line for logging in later via serial-line: echo ttyPSC0 >> /nfsroot/etc/securetty
4. Also add that serial-line to /nfsroot/etc/inittab: echo "s0:12345:respawn:/sbin/agetty 115200 ttyPSC0 vt100" >> /nfsroot/etc/inittab (you can use linux instead of vt100 for a coloured term, but then you should have a good serial communicotian program)
5. Add a password-hash for the root-password into /nfsroot/etc/shadow. I used htpasswd2 from apache for it. Call it with htpasswd -nb root secret. This will create the hash for the root-user with the password secret. Replace the * after root: in the shadow-file with that hash.
6. Give your system a hostname in /nfsroot/etc/hostname and add that hostname after the localhost-entry in /nfsroot/etc/hosts
7. Unfortunately mounting another nfs-share for the portage-tree later will not work, as nfs-utils are not installed yet (I'm working on a special nfsroot-efika-stage4). Bind-mounting a portage-tree on a Gentoo-system will not work either (nfs just ignores that). So we have to download and unpack a current portage-snapshot into /nfsroot/usr/portage. Alternatively you can rsync your local portage-tree into /nfsroot: rsync --archive --progress --exclude=packages/ --exclude=distfiles/ /usr/portage/ /nfsroot/usr/portage/.
8. Finally unpack the precompiled modules into /nfsroot (tar xvzf modules_efika.tgz -C /nfsroot/.

The nfsroot is now prepared for a first and simple boot. Let us now set up the dhcp-/tftp-/nfs-server-voodoo.